How to clean the hydraulic system of a small loader?

Small loaders often encounter various malfunctions during use, and there are only three reasons that can cause malfunctions. One is improper operation, one is insufficient maintenance, and the other is poor lubrication. Most malfunctions are caused by improper operation. Big data shows that due to long-term incorrect operations, most machinery will experience major and minor failures after a period of use, indirectly shortening its service life.
Cleaning method for hydraulic system of small loader:
1. Regularly replace the hydraulic oil and filter of the small loader. High quality hydraulic oil contains various additives to prevent oil deterioration. But these additives will lose their effectiveness after a period of time. Therefore, regular oil changes should be made to ensure the effectiveness of additives. The filter can only absorb a limited number of dust particles and other impurities in the engine oil. For small machines, please replace the hydraulic oil tank return filter every 1000 working hours. Clean the suction filter of the hydraulic oil tank when replacing hydraulic oil to maintain system cleanliness. When replacing the hydraulic oil filter, please check if there are any metal particles or debris at the bottom of the filter. If there are copper or iron shavings, it indicates that the hydraulic pump and hydraulic motor or valve may be damaged or will be damaged. If there is rubber, it means that the seal of the hydraulic cylinder is damaged.
2. Regularly draining dirt from the oil tank of a small loader, and regularly draining water and sediment from the tank to remove impurities in the oil is very important, but replacing hydraulic oil is also important. Regularly use it throughout the entire hydraulic system. A reliable method to thoroughly remove system impurities, oxidized hydraulic oil, and other harmful impurities is to add clean hydraulic oil to the hydraulic system again. Please empty the hydraulic oil tank every 250 working hours. There is dirt in the fuel tank.
If the hydraulic oil of a small loader is contaminated, especially when the pump, cylinder, and motor are damaged, all hydraulic oil must be replaced and the oil tank cleaned. Small loader